9
HELPFUL HINTS
• The Power Button is touch control, so press button gently.
• It is recommended to use fresh, cold whole milk for best frothing results. Non-dairy milk does not froth as well as dairy milk and is not
recommended for frothing.
• This Frother heats milk to approximately 50-65° Celsius, which is the optimal temperature for frothing. Over-heating will destroy milk nutrients.
• The key factor in achieving good froth is using fresh and cold milk. Milk should be very cold. Use milk that has been taken directly from the
refrigerator and start frothing immediately.
CLEANING AND MAINTENANCE
Proper maintenance will ensure many years of service from your appliance. Clean the appliance after every use. This appliance contains no user
serviceable parts and requires little maintenance. Do not try to repair it yourself. Leave any servicing or repairs to qualied personnel.
WARNING: Always make sure the appliance is o and ensure that the plug is disconnected from the wall outlet before cleaning. Allow all parts of
the appliance to cool down completely. NEVER touch the interior of the Pitcher or Milk Frothing Whisk immediately after use. Allow the appliance
and all parts to cool thoroughly before cleaning.
NEVER IMMERSE THE FROTHER, POWER BASE OR POWER CORD IN WATER OR ANY OTHER LIQUID.
TO CLEAN THE FROTHER:
• Be sure Frother is unplugged, then hand wash the interior of the Pitcher, Lid and Milk Frothing Whisk with warm, soapy water. Rinse and dry
thoroughly.
• The Lid is dish-washer safe. Separate the silicon ring from the Lid before washing/rinsing. Reassemble the ring into the Lid before reuse or
storage.
• Wipe exterior surfaces of the Pitcher and Power Base with a soft, moist cloth.
• Do not put the Pitcher or the Power Base in the dishwasher.
• Clean after every use.
To Next Page
Loading...