Truck Hero TruXedo Sentry CT User Manual

TruXedo Inc. • 2209 Kellen Gross Drive Yankton, SD 57078 • 877-878-9336 • truxedo.com ©TruXedo Inc., 2021 Part# 1118738 Rev. A 01.14.2022
The serial number for the cover is located here.
For future reference, write it here:
___________________________________.
OWNER'S MANUAL
Damaged or missing parts? Call
877-878-9336 Mon - Fri 8 a.m. - 5
p.m. CT. Parts will be shipped to
you factory direct. Do not return
kit to place of purchase. To view
install video visit truxedo.com/
lopro

1
2
1. 1706408 MALE CLAMP
2. 1703889 FEMALE CLAMP
3. 1701208 CAP SCREW 5/16” X 1 1/4”
4. 1700428 FLAT WASHER 5/16”
Item Part # Description
4
Tailgate end
Position clamp here
Front of box
Position Rear tie down here
Position clamp here
Position clamp here
Three clamps per side needed.
Position Front tie down here
Assemble clamps as shown below.
3
Slide clamps into cargo rail as shown below. Evenly space
the clamps (see step 4). Tie down cleats can be reinstalled

Reinstall cargo rail end plugs.
Repeat steps 1-4 for
passenger side clamp

PARTS INCLUDED
IN YOUR KIT:
Driver side rail
Passenger side rail
Cover assembly
6x clamps
Bulkhead seal (on select make/models)
2x Hex Nuts
  
2x Square Head Screws
A
B
C
D
E
F
G
H
1
2
3
4
6x
Rail, Driver Side
Rail, Passenger
Side
D
C
B
A
E
F G H
1

Truck Hero TruXedo Sentry CT Specifications

General

Brand	Truck Hero
Model	TruXedo Sentry CT
Category	Automobile Accessories
Language	English

Summary

Installation: Clamp Assembly

Assemble and Position Truck Bed Cover Clamps

Guides on assembling and positioning the clamps onto the truck bed rails for cover attachment.

Side Rail Installation

Positioning and Aligning Side Rails

Instructions for correctly placing and aligning the driver and passenger side rails on the truck bed.

Cover Assembly and Header Installation

Attach Header Seal and Install Cover

Details on fitting the bulkhead seal, preparing the header, and placing the cover onto the rails.

Cover Operation: Closing and Sealing

Securing the Front Header Seal

Instructions for attaching the front header seal using washers and nuts for water shedding.

Methods for Closing and Latching

Explains preferred and alternative methods for securely closing and latching the truck bed cover.

Cover Operation: Opening and Securing

Opening the Truck Bed Cover

Guides the user on how to safely release and unroll the truck bed cover.

Securing Hook and Loop Fasteners

Instructions on properly securing the hook and loop fasteners along the cover's length.

Driving, Maintenance, and Safety

Securing Cover for Driving

Instructions on how to secure the rolled cover when driving with it open.

Cover Maintenance and Care

Provides guidance on cleaning, protecting, and maintaining the cover's surface and components.

User Responsibilities and Operating Tips

Owner Responsibilities and Safety Instructions

Outlines user duties, general safety instructions, and critical warnings for cover usage.

Important Operating and Safety Tips

Offers essential tips for safe operation, including temperature warnings and cover handling.

Continued Operating and Maintenance Tips

Hook and Loop Engagement and Cover Handling

Details on hook and loop securing and correct/incorrect methods for cover operation.

Preventing Cover Tracking Marks

Advice on cleaning and maintenance to prevent dust marks on the cover's surface.

Troubleshooting and Warranty

Common Installation Troubleshooting

Addresses issues like cover assembly not attaching or header latching problems.

Product Warranty Information

Explains the 3-year (Sentry) and 5-year (Sentry CT) limited warranty terms.