Need help?Do you have a question about the True blue power TC240 and is the answer not in the manual?
Overview of the TC240 DC/DC Power Converter, its purpose, and key features.
Details the electrical and physical attributes of the TC240 DC/DC Power Converter.
Explains the cooling methods for the TC240, primarily passive conduction and radiation.
Discusses flexibility in mounting location, altitude, temperature, and humidity resistance.
Provides guidance on routing heavy gauge wires and avoiding hazards like chafing.
Outlines TSO approval standards, installation approval, and operational temperature limits.
Explains nameplate information and modification (MOD) status identification.
Provides interconnect diagrams, mounting dimensions, and installation information.
Details the process of unpacking and inspecting the TC240 DC/DC Converter.
Instructions for constructing the cable harness, including wire gauge selection.
Details the base mounting procedure and screw requirements for the TC240.
A critical warning against connecting the output to another power source.
Steps for verifying output and functionality after installation.
Explains the TC240's performance as a DC/DC converter and output current vs. voltage.
Details features like remote on/off, input voltage limit, over-temperature, and short circuit protection.
States that no periodic maintenance or calibration is required for continued airworthiness.
Lists environmental test conditions and categories met by the TC240.
General| Power | 240 W |
|---|---|
| Output Current | 10 A |
| Cooling | Convection |
| Output Voltage | 24V DC |
| Efficiency | 90% |
| Protection | Over Voltage, Short Circuit |
To Next Page
