AIS-CTRX CARBON Class B AIS Transponder Manual
1.1E 46 CTRX CARBON Manual
The last field in proAIS is ‖Serial data‖, where an experienced installer can see that
the transponder is receiving data directly from the AIS-CTRX CARBON transponder.
The field ‖Enter commands below‖ is also used by authorised retailers to reset the
AIS transponder's data if needed. In order to do this, True Heading AB must be
contacted first to receive an access code. This requires that the serial number on the
transponder is provided. When the code is obtained, it is simply sent into the
transponder by clicking on the icon ‖Send‖.
From the field ‖Serial data‖ data can also be recorded and stored to disk in order to
be sent to support for analysis of receiver data.
Figure 33 In the field [Serial data] the data the transponder transmits is displayed on its port and from
this data, important information can show that the transponder functions correctly.
To Next Page
Loading...
