True Innovations 44172 - Page 2

Item number: 44172
EXECUTIVE CHAIR
A. Remove all parts from carton and separate them into part number groups as indicated in parts list.
B. To begin assembly, place 5 Star Base (2) upside down and insert Casters (1) into bottom of Base (2).
C. Turn Base (2) right side up on the floor and insert Gas Lift (4) into center hole on Base (2).
D. Place Telescoping Cover (3) over the Gas Lift (4) and rest it on the Base (2).
E. Attach Seat Plate (5) (with front of seat plate facing front of seat cushion) onto the bottom of Seat Cushion (7)
by using 2-1/4” Big Screws (9) and 7/8” Big Screws (10) tighten the screws.
F. Place the Seat Cushion (7) with Seat Plate (5) on top of Gas Lift (4) and press down until fully engaged.
G. Fasten Arms (6A & 6B) onto sides of Seat Cushion (7) by using 1-1/4” Small Screws (11). Do not tighten
screws completely.
H. Put Back Cushion (8) flat between Arms (6A & 6B), and use 1-1/4” Small Screws (11) to locate lower screw
holes on both Arms (6A & 6B) & Back Cushion (8) as Diagram 1. Push the Back Cushion (8) up to a vertical
position and attach the Arms (6A & 6B) by using 1-3/4” Small Screws (12) as Diagram 2. Tighten the
screws.
I. Place Black Plastic Caps (14) into arm holes once screws have been tightened. Please make sure to have
the groove of the caps to match the groove of the arms.
J. Fix the Adjustable Knob under the seat cushion by using 1” Small Screws (13) as Diagram 3. Tighten all
the screws.
K. Fix the cable for the Adjustable knob into the plastic clip attached to the bottom of the chair seat as Diagram
3.
L. Periodically (every 90 days) make sure that the screws are still fully tightened.
ATTENTION: Make certain all screws are fully tightened before using chair.
Part #
Description
Quantity
1.
2.
3.
4.
5.
6A.
6B.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Casters
5 Star Base
Telescoping Cover
Gas Lift
Seat Plate
Left Arm
Right Arm
Seat Cushion
Back Cushion
2-1/4” Big Screws
7/8” Big Screws
1-1/4” Small Screws
1-3/4” Small Screws
1” Small Screws
Black Plastic Caps
Allen Key
5
1
1
1
1
1
1
1
1
2
2
6
2
2
8
1
P A R T S L I S T
A S S E M B L Y I N S T R U C T I O N S