Need help?Do you have a question about the True DNA and is the answer not in the manual?
General| Brand | True |
|---|---|
| Model | DNA |
| Category | Outdoor Furnishing |
| Language | English |
Place carpet or a cardboard stand before starting the DNA assembly.
Align side element A with center element B in the same direction, respecting numerical sequence.
Secure module B with module A using four M6x12mm screws, then repeat with module C.
Flip the bench down with at least three people and place it in the final destination location.
Screw the feet of each leg to the preferred height for stability on the floor.
Secure the feet height with a nut in the opposite direction of previously set feet.
Avoid dragging the DNA bench in any direction; lift it instead.
Main bench module A for assembly.
Main bench module B for assembly.
Main bench module C for assembly.
Screws used for securing bench modules.
Recommendations for keeping the product in good condition, including cleaning methods and usage advice.
To Next Page