Need help?Do you have a question about the True move H and is the answer not in the manual?
General| Network Type | 4G LTE |
|---|---|
| Wi-Fi Standards | 802.11 b/g/n |
| Wi-Fi Frequency | 2.4 GHz |
| Maximum Wi-Fi Speed | 150 Mbps |
| SIM Card Slot | Yes |
Note the SSID and Password from the device's back label for initial network connection.
Plug the device in ensuring the TRUE logo is upright for correct orientation.
Press and hold the power button to initiate the device's startup sequence.
Hold the power button until the Wi-Fi LED blinks green, then release to start connection.
Observe the front center LED turn red, indicating the device is connecting to the mobile network.
The LED will turn green or blue, signifying a successful connection and readiness for use.
Reference table detailing LED status, colors, and corresponding descriptions for network and Wi-Fi.
Activate the Wi-Fi function on your device to search for available networks.
Search for and select the specific SSID previously noted from the device label.
Enter the Wi-Fi password obtained from the device's label into the provided field.
Press the "Join" button to establish the connection to the Wi-Fi network.
Confirm a check mark next to the SSID and a Wi-Fi symbol, indicating a successful phone connection.
The device's Wi-Fi status blinking white and red indicates successful data transfer between devices.
Open a web browser on the connected device, such as Safari, to proceed.
Type the provided URL into the address bar to access the service or welcome page.
View welcome information, phone number, and any applicable promotions used.
Verify internet functionality by browsing a common website like Google.
To Next Page