CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step E: Re-install Left Rear Shroud:
• Align the Left Rear Shroud with the Right
Rear Shroud and U-Shaped Rear Cover
components
• Re-install quantity 9 screws to the Left
Rear Shroud, using a Phillips head
screwdriver (not provided)
Unit Leveling (if necessary):
Turn feet (4x, located on the Front
and Rear Stabilizer) to adjust the
levelness of the unit.
Final Unit Connections:
Truefitness.com / 800.426.6570 / 636.272.7100 23
To Next Page
Loading...
