True TG2FRI-2S User Manual

Specifi cations subject to change without notice.
Chart dimensions rounded up to the nearest
1
/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
TG2FRI-2S
TG2FRI-2S
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs and exceptional food safety.
Oversized, factory balanced,
refrigeration system holds -10°F
(-23.3°C) for the best in food
preservation.
300 series stainless steel doors and
front. Anodized quality aluminum
exterior sides, back and bottom.
NSF approved, white aluminum
interior sides and back liner. 300
series stainless steel door liners
and fl oor with coved corners.
Designed to accept roll-in racks
(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
One (1) heavy gauge stainless steel
ramp standard per door.
Three (3) lifetime guaranteed,
cam-lift hinges per doora. Full
180° open capability with a stay
open feature at 120°.
Automatic defrost system time-
initiated, temperature-terminated.
Saves energy consumption and
provides shortest possible defrost
cycle.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
TG Series:
Roll-In Solid Door Freezer
®
Model Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Confi g.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
LD
†
H
*
TG2FRI-2S 2 75
2124
68
1728
34
1
/2
877
83
3
/4
2128
1
1
/5 115/208-230/60/1 8.0 14-20P 9
2.74
n/a
†
Depth does not include 4
1
/4" (108 mm) for ramps.
*
Height does not include 1" (26 mm) for system mechanical components.
note: Requires 115/208-230/60Hz, single phase, 3 pole, 4 wire circuit.
3/07
R

True TG2FRI-2S Specifications

General

Brand	True
Model	TG2FRI-2S
Category	Freezer
Exterior Material	Stainless Steel
Interior Material	Aluminum
Number of Doors	2
Door Type	Solid
Capacity	47 cu. ft.
Temperature Range	-10°F to 0°F
Refrigerant	R290
Voltage	115 V
Defrost Type	Automatic
Shelves	6
Finish	Stainless Steel

Summary

TG Series: Roll-In Solid Door Freezer

Model TG2FRI-2S Features

Key features of the TG2FRI-2S model, including material quality, refrigeration system, and design.

Rough-In Data

Technical specifications for installation, including cabinet dimensions, electrical, and capacity details.

Approvals

List of product approvals and certifications obtained for the TG2FRI-2S model.

Standard Features

Design

Focuses on enduring quality, materials, and components for optimal product temperature and food safety.

Refrigeration System

Details the factory-engineered capillary tube system, evaporator, fan motor, and automatic defrost function.

Cabinet Construction

Describes exterior and interior materials, insulation, ramps, and capacity for roll-in racks.

Doors

Details door construction, locks, handles, gaskets, hinges, and opening capabilities.

Lighting

Information on the type of interior lighting used and its safety features.

Model Features

Highlights exterior display, evaporator coating, cabinet frame heater, and NSF-7 compliance.

Electrical

Specifies pre-wiring, connection requirements, and dedicated outlet details for the unit.

Optional Features/Accessories