Specifi cations subject to change without notice.
Chart dimensions rounded up to the nearest
1
/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T
RUE
R
EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
TM
U.S.A.
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
TG2FRI-2S
TG2FRI-2S
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs and exceptional food safety.
Oversized, factory balanced,
refrigeration system holds -10°F
(-23.3°C) for the best in food
preservation.
300 series stainless steel doors and
front. Anodized quality aluminum
exterior sides, back and bottom.
NSF approved, white aluminum
interior sides and back liner. 300
series stainless steel door liners
and fl oor with coved corners.
Designed to accept roll-in racks
(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
One (1) heavy gauge stainless steel
ramp standard per door.
Three (3) lifetime guaranteed,
cam-lift hinges per doora. Full
180° open capability with a stay
open feature at 120°.
Automatic defrost system time-
initiated, temperature-terminated.
Saves energy consumption and
provides shortest possible defrost
cycle.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
TG Series:
Roll-In Solid Door Freezer
®
Model Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Confi g.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
LD
†
H
*
TG2FRI-2S 2 75
2124
68
1728
34
1
/2
877
83
3
/4
2128
1
1
/5 115/208-230/60/1 8.0 14-20P 9
2.74
n/a
†
Depth does not include 4
1
/4" (108 mm) for ramps.
*
Height does not include 1" (26 mm) for system mechanical components.
note: Requires 115/208-230/60Hz, single phase, 3 pole, 4 wire circuit.
3/07
R
To Next Page
Need help?
General
