STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TUC-48-LP TFQY102E TFQY102S TFQY02P TFQY1023
TUC-48-LP
DESIGN
• True’s undercounters are designed
with enduring quality and value that
protects your long term investment. Our
commitment to using the highest quality
materials and oversized refrigeration
insures exceptional food preservation.
• “Low Profi le” models are designed
to slide easily under custom built
countertops.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Oversized, factory balanced refrigeration
system with guided airfl ow to provide
uniform product temperatures in cabinet
interior.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (0.5°C to
3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True merchandisers a more
effi cient low velocity, high volume
airfl ow design. This unique design
insures colder standard temperatures
and faster recovery in high use
situations.
• Condensing unit access located in back,
slides out for easy maintenance.
• Electric heated condensate pan.
CABINET CONSTRUCTION
• Exterior - 300 Series stainless steel top,
front and sides with matching aluminum
back.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor
with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• 1
1
/2” (39 mm) diameter dual swivel
castors permit easy placement. 31
7
/8"
(810 mm) work surface height.
DOORS
• Stainless steel exterior with white
aluminum liner to match cabinet
interior.
• Positive seal, self-closing doors with 90°
stay open feature. Doors swing within
cabinet dimensions.
• Door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Four (4) adjustable, heavy duty PVC
coated wire shelves 21
9
/16"L x 16"D
(548 mm x 407 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on
1
/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230-240V / 50Hz.
❒ Basic overshelf.
❒ Service shelf.
❒ Double service shelf.
❒ Barrel locks (factory installed). Requires
one per door.
❒ 30" (763 mm) deep,
1
/2" (13 mm) thick,
white polyethylene cutting board.
❒ Additional shelves.
❒ Heavy duty tops (16 gauge)
❒ Standard height unit with 5"
(127 mm) diameter castors.
36" (915 mm) work surface height.
❒ ADA compliant unit with 34"
(864 mm) work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve and
requires R404A refrigerant). Consult
factory technical service department for
BTU information.
115/60/1
NEMA-5-15R
Undercounter:
Low Profi le Solid Door Refrigerator
ELEVATION
RIGHT VIEW
21
15
/32"
(546 mm)
52
7
/32"
(1327 mm)
30
1
/16"
(764 mm)
2
1
/8"
(54 mm)
1"
(26 mm)
48
5
/16"
(1228 mm)
31
7
/8"
(810 mm)
29
3
/4"
(756 mm)
To Previous Page
Loading...
