To Next PageTo Next PageWhy True Refrigerator compressor voltage is below 90%?
If the voltage at the compressor terminals is below 90% of the nameplate voltage, it indicates a problem with the electrical supply. Check to determine if wire sizes are adequate, electrical connections are loose, the circuit is overloaded, or if the power supply is inadequate.
General| Type | Reach-In Refrigerator |
|---|---|
| Capacity | 49 cu. ft. |
| Doors | 2 |
| Temperature Range | 33°F to 38°F |
| Voltage | 115V |
| Horsepower | 1/2 HP |
| Exterior Finish | Stainless Steel Front, Aluminum Sides |
| Dimensions | 54 1/8" W x 29 1/2" D x 83 3/8" H |
| Refrigerant | R290 |
| Interior Finish | Aluminum Liner, Stainless Steel Floor |
| Shelves | 6 adjustable, heavy-duty PVC coated wire shelves |
Basic safety precautions when using electrical appliances.
Warnings about child entrapment and proper disposal of old units.
Strict warning against using extension cords for safety and warranty.
Procedures for uncrating, locating, and leveling the unit for proper installation.
Guidelines for electrical connections, wiring, and initial unit startup.
Detailed guide to LAE controller functions, settings, defrost, and high altitude adjustments.
Instructions for cleaning the condenser coil to maintain unit efficiency.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent corrosion.
Procedures for replacing interior and integrated door lighting bulbs.
Details of the parts and labor warranty for units sold in the USA and Canada.
Information on what is not covered by the warranty, including misuse and consequential damages.
