True T-49 - Light Cover Install for T-12 FG

............ www.truemfg.com ............
True Food Service Equipment, Inc.
27
27
INSTALLATION / OPERATION INSTRUCTIONS
REQUIRED TOOLS


STEP 1



STEP 2








STEP 3


- IMPORTANT -
Before replacing light cover
turn cabinet on and wait until it
reaches temperature.
NOTE
If cabinet is turned off and
interior allowed to warm up lamp
cover may become loose and
require reinstallation.
Follow directions above.
- IMPORTANT -
Before replacing light cover
turn cabinet on and wait until it
reaches temperature.
IMPORTANT
Before installing lamp cover turn
cabinet on and allow it to reach
temperature.
Rubber Gasket
Lamp Holder
Lamp Cover
Light Cover Installation for T-12FG
1
2
3