Trueshopping BC1E36F - Page 60

Trueshopping
Possible cause
Solution
Engine starts and is stalled immediately
Incorrect idle adjustment
Contact the customer service
Tool does not work with full power
Machine overloaded
Do not press down excessively
during use.
Cutting
thread
too
Follow up the cutting thread.
short/broken
Cutting blade dull or damaged
Have it sharpened in a
specialised
workshop
or
replace it.
Device overloaded as grass too
Trim the grass in several
high
passes.
Air filter contaminated
Clean or replace the air filter.
Carburettor
incorrectly
Contact the customer service.
adjusted
Silencer blocked
Clean the outlet of the silencer.
Strimmer fibre is not coming out
No more thread on the spool
Replace the thread spool.
Cutting thread entangled.
Recoil the cutting thread.
www.TrueShopping.co.uk
Page: 60 of 69