Trumatic S 3002 P - User Manual

Trumatic S 3002 P / S 3002 / S 5002
Page 40
Einbauanweisung Seite 3
Installation instructions Page 8
Istruzioni di montaggio Pagina 18
Inbouwhandleiding Pagina 23
Monteringsanvisning Side 28
Instructions de montage Page 13 Instrucciones de montaje Página 33
Komfort für unterwegs

Summary

General Installation Guidelines and Approvals

Regulations and Intended Use

Covers warranty conditions, approved applications, and regulatory compliance for Trumatic heaters.

Installation Location and Cut-out Specifications

Guidance on selecting the heater's position and specifying correct dimensions for the vehicle opening.

Preparatory Work and Installation Boxes

Heater Installation Procedures

Trumatic S 3002 P Installation Steps

Detailed procedure for physically installing the Trumatic S 3002 P heater unit.

Trumatic S 3002 Installation Steps

Detailed procedure for physically installing the Trumatic S 3002 heater unit.

Trumatic S 5002 Installation Steps

Detailed procedure for physically installing the Trumatic S 5002 heater unit.

Exhaust Gas Cowl Installation

Exhaust Duct Installation

Gas Connection Requirements

Heater Casing Assembly

Front Case and Electrical Connection

Front Case with Flame Effect

Details on assembling the front case, including control panel placement and flame effect.

12 V Electrical Connection

Guidance for connecting the heater to the vehicle's 12V power supply system.

Function Check and Final Steps

Special Installation Instructions

General Installation Instructions

Trumatic S 3002 P Specifications

General

Type	Gas heater
Weight	4.2 kg
Dimensions	350 x 300 x 150 mm
Fuel type	Propane/butane
Operating pressure	30 mbar
Ignition	Piezo ignition
Power output	3000 W
Operating voltage	12 V