4
Important Safety Instructions
Grounding and Fuse Replacement
Grounding Note
• This chair features a cord with a grounding conductor. Only use the appropriate
outlet to power your massage chair.
Fuse Replacement Note
• If a fuse burns out in your chair, turn the switch to the OFF position and unplug
the chair. Locate the switch box and identify the dysfunctional fuse. Only replace
a burned out fuse with a matching fuse. Contact a professional electrician for
further assistance if needed.
Operational Notes
Footrest Notice
• When the footrest is lifting, do not apply pressure on the footrest to avoid the
massage chair falling forward which will result in damage to the chair or can
cause personal injuries.
Massage Head Placement
• Before sitting on the massage chair, make sure that the massage head stays in
the seat cushion to avoid discomfort to the buttocks while the body is pressing
down.
Power Cord Safety
• Do not pull out the control cable or power cord during standby or the power-on
state to avoid chair damage or electrocution accidents. We advise you unplug the
controller cable and power cord, and put it away after you use the chair.
Zero Gravity/Reclining Safety
• When you start the zero gravity lying function, make sure to check whether there
are children and pets under the bottom of the footrest and backrest, this may
cause the chair to be damaged or may result in personal injuries.
Ground Wire Placement Warning
Do not place the ground wire near a gas pipe, phone wire, lightning rod,
or water pipe. These areas present high risks for re, electric shock,
and damage.
To Next Page
Loading...
