Need help?Do you have a question about the Truper BOS-1SM and is the answer not in the manual?
Details on voltage, power, flow, depth, and cable requirements for optimal tool operation.
Maintain a clean, well-lit area, avoid explosive atmospheres, and protect from moisture for safe operation.
Ensure proper grounding, use correct extension cords, and prevent unauthorized use for electrical safety.
Always wear appropriate safety gear like gloves and eye protection when operating the tool.
Use for domestic/garden tasks with appropriate water types; avoid continuous operation and dry running.
Ensure use of safety circuit interrupters, check voltage, and protect cables from damage.
Do not pump corrosive liquids, exceed temperature limits (95°F), or operate in freezing conditions.
Familiarize yourself with the pump's components like the float switch, suction base, and outlets.
Connect hoses (1-1/4" to 1/2") using the universal connector or adapter for efficient water transfer.
Position the pump stably in water, ensuring float switch movement and clear suction base.
Understand automatic ON/OFF based on water level and how to manually control the float switch.
Prevent dry operation, be aware of motor thermal protection, and rinse after pumping chlorinated water.
Inspect screws for tightness and clean the turbine if contaminated by removing the suction base.
Store in a dry, frost-protected area; all repairs must be done by TRUPER authorized service centers.
Details on voltage, power, flow, depth, and cable requirements for optimal tool operation.
Maintain a clean, well-lit area, avoid explosive atmospheres, and protect from moisture for safe operation.
Ensure proper grounding, use correct extension cords, and prevent unauthorized use for electrical safety.
Always wear appropriate safety gear like gloves and eye protection when operating the tool.
Use for domestic/garden tasks with appropriate water types; avoid continuous operation and dry running.
Ensure use of safety circuit interrupters, check voltage, and protect cables from damage.
Do not pump corrosive liquids, exceed temperature limits (95°F), or operate in freezing conditions.
Familiarize yourself with the pump's components like the float switch, suction base, and outlets.
Connect hoses (1-1/4" to 1/2") using the universal connector or adapter for efficient water transfer.
Position the pump stably in water, ensuring float switch movement and clear suction base.
Understand automatic ON/OFF based on water level and how to manually control the float switch.
Prevent dry operation, be aware of motor thermal protection, and rinse after pumping chlorinated water.
Inspect screws for tightness and clean the turbine if contaminated by removing the suction base.
Store in a dry, frost-protected area; all repairs must be done by TRUPER authorized service centers.
General| Model | BOS-1SM |
|---|---|
| Category | Water Pump |
| Brand | Truper |
| Power Source | Electric |
| Voltage | 127V |
| Horsepower | 1 HP |
| Maximum Immersion Depth | 7 m |
| Maximum Particle Size | 5 mm |
| Shaft Material | Stainless Steel |
| Type | Submersible |
| Outlet Diameter | 1 inch |
To Next Page
