Truper COMP-AERO - User Manual

Truper COMP-AERO

24 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Instructivo de

Compresor de

diafragma

para aerógrafo

COMP-AERO

Modelo Código

COMP-AERO

Este Instructivo es para:

17247

58 PSI

Lea este Instructivo por completo

antes de usar la herramienta.

ATENCIÓN

Presión

ESPAÑOL

ENGLISH

399,8 kPa

Questions and Answers

S
susan04Jul 28, 2025
What to do if my Truper Compressor motor is running but there is no air pressure?
- M
  Michelle PriceJul 28, 2025
  If your Truper Compressor motor runs but no air pressure is building up, several issues could be the cause. These include loose screws in the rod or cylinder cover, a loose air connection, a damaged air hose, a loose or damaged bearing, a valve plate out of place, or a damaged retention ring due to excessive high-pressure use. In any of these cases, take the tool to an Authorized Service Center.
C
Casey BerryAug 11, 2025
Why is the motor not running on my Truper COMP-AERO Compressor?
- M
  Mark FitzgeraldAug 11, 2025
  If the motor of your Truper Compressor isn't running, it could be due to several reasons: * There's no power supply: Connect the power cord to a grounded 110 V power outlet. * The power cord is damaged: Take the tool to an Authorized Service Center. * The electric wiring inside the unit is defective: Take the tool to an Authorized Service Center. * The switch is defective: Take the tool to an Authorized Service Center.

Summary

Technical Data

Power Requirements

Details on connecting the tool to power sources and extension cable usage.

General Power Tools Safety Warnings

Operational Safety Guidelines

Covers safe practices for work environment, operator alertness, and PPE.

Electrical and Tool Care Safety

Addresses electrical precautions, proper tool usage, and maintenance.

Service Recommendations

Guidance on where and how to get the tool serviced for repairs.

Safety Warnings for Compressors

General Compressor Safety

Specific safety advice related to compressor operation and potential hazards.

Heat and Accessory Safety

Warnings about hot parts, safe handling, and using approved accessories.

Parts

Assembly

Setup Instructions

Steps for correctly positioning and connecting the compressor before operation.

Start Up

Initial Operation Guide

Instructions on starting the compressor, setting pressure, and safe shutdown procedures.

Maintenance

Routine Maintenance

Procedures for regular cleaning, post-use care, and periodic filter cleaning.

Professional Service

Information on where to get professional servicing for the tool.

Troubleshooting

Notes

Authorized Service Centers

Branches

Warranty Policy

Summary

Technical Data

Power Requirements

Details on connecting the tool to power sources and extension cable usage.

General Power Tools Safety Warnings

Operational Safety Guidelines

Covers safe practices for work environment, operator alertness, and PPE.

Electrical and Tool Care Safety

Addresses electrical precautions, proper tool usage, and maintenance.

Service Recommendations

Guidance on where and how to get the tool serviced for repairs.

Safety Warnings for Compressors

General Compressor Safety

Specific safety advice related to compressor operation and potential hazards.

Heat and Accessory Safety

Warnings about hot parts, safe handling, and using approved accessories.

Parts

Assembly

Setup Instructions

Steps for correctly positioning and connecting the compressor before operation.

Start Up

Initial Operation Guide

Instructions on starting the compressor, setting pressure, and safe shutdown procedures.

Maintenance

Routine Maintenance

Procedures for regular cleaning, post-use care, and periodic filter cleaning.

Professional Service

Information on where to get professional servicing for the tool.

Troubleshooting

Notes

Authorized Service Centers

Branches

Warranty Policy

Truper COMP-AERO Specifications

General

Motor Power	2 HP
Voltage	120 V
Horsepower	2 HP
Noise Level	78 dB
Air Flow	6.5 CFM