Need help?Do you have a question about the Truper ESMA-9N3 and is the answer not in the manual?
Guidelines for choosing the correct disc size, RPM rating, and fitting for safe and effective operation.
Pre-operation checks including assessing the job, removing tools, and verifying guard and disc condition.
Advice on using both hands and proper grip for grinding and cutting tasks for optimal results.
Detailed steps for replacing worn carbon brushes, including cleaning and proper seating.
Guidelines for choosing the correct disc size, RPM rating, and fitting for safe and effective operation.
Pre-operation checks including assessing the job, removing tools, and verifying guard and disc condition.
Advice on using both hands and proper grip for grinding and cutting tasks for optimal results.
Detailed steps for replacing worn carbon brushes, including cleaning and proper seating.
General| Voltage | 127 V |
|---|---|
| Frequency | 60 Hz |
| Disc diameter | 4.5 inches |
| No load speed | 11000 rpm |
| Spindle | 5/8" - 11 UNC |
To Next Page
