● Hybrid mode
1. Connect your earbuds and Bluetooth device
1. Open charging case lid and your earbuds will auto connect
1. the Bluetooth device. When the connection is completed,
1. please keep the lid open and start the following steps.
2. Take out the right or left side of earbud, close the charging
2. case lid and then press the charging case button until four
2. lights are all ON. So you can start to set up “Hybrid mode”.
3. Open APP, press the upper left icon , find “Software
3. setting”, then press “Hybrid mode ”.
● Translation stick mode
1. Connect your earbuds and Bluetooth device
1. Open charging case lid and your earbuds will auto connect
1. the Bluetooth device. When the connectionis completed,
1. please keep the lid open and start the following steps.
2. Close the charging case lid and then press the charging
2. case button until four lights are all ON. So you can start to
2. set up “Translation stick mode”.
3. Open APP, press the upper left icon , find “Software
3. setting”, then press “Translation stick mode ”.
To Next Page