TRUST POWER PROTECTOR 210
2
UK
4 Technical Specifications
Maximum total continuous amperage 10 A (protected)
Maximum input voltage 250 V AC
Maximum current surge 13500 A (non-recurrent)
Maximum pulse energy 420 J
Maximum pulse energy telephone 70 J
Indicators LED
EMI / RFI noise reduction [dB] 4dB ~ 60dB
5 Trouble shooting
Problem Cause Possible solution
No voltage on the wall
socket.
Check the fuse
(automaton) in the fuse
box.
No voltage on the output
of the Power Protector.
Product consumption
overload (> 10 A).
Guarantee regulations no
longer apply. STOP using
the appliance and see to
it that it is disposed of in
an environment friendly
way.
Indication LED does not
light up after using it the
first time.
Power Protector has been
damaged.
STOP using the
appliance; return it to the
dealer for guarantee.
Check the FAQ's on the Internet (www.trust.com). You can also register your product
at www.trust.com so that you are able to receive optimal guarantee and service
support. You will be automatically informed of developments to your product and other
Trust products. You will also have the chance of winning some spectacular prizes.
If you still have problems after trying these solutions, please contact one of the Trust
Customer Care Centers. The last page of this electronic instruction manual, as well as
the back on the printed quick installation manual, contains more information. Please
have the following information available:
• The article number, in this case: 12407 (European version), 12408 (French
version) or 12409 (Italian version);
• A good description of what does not work.
• A good description of when the problem occurs.
To Previous Page
Loading...