The remote control uses on button cell battery, type CR2025(3V).To remove the battery
carriage use your thumb to squeeze the release tab to the right and then pull the carriage
out. Place the battery into the carriage and slide the carriage back into the remote.
NOTE:
Follow battery disposal instruction on battery packaging, or contact your local safety
council for safely disposal of batteries.
CLEANING AND MAINTENANCE
1. Please clean it regularly to avoid the dust gathered which might lead to the disorders of
the product.
2. Please make sure the power is cut off and the fan is unplugged from the socket before
cleaning. Also, please be aware of the motor should be cool down before cleaning the fan.
3. Do not use alcohol, volatile oil, bleach-etc. to wipe this product.
4.Cleaning methods for various parts
(1) Body shell and air outlet: please wipe it with a slightly damp cloth, do not soak in water.
(2) Rear grille and filter sponge: Use a screwdriver to loosen the fixed screws of the rear grille.
Rear grille and filter sponges can be cleaned with water and please make sure that these
components are completely dry before re-installing them to the machine.
To Next Page
Loading...
