Product Overview
NOTE
: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product
purchased. All images in this manual are for reference purposesonly. Parts are not necessarily pictured to scale.
Getting
Started
Before first use
·
Unpack
: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep
the original packaging and materials in aѕаfе рlасе. Іt wіll hеlр рrеvеnt апу dаmаgеif the product needs to be transported
in the future, and you can use it to store the appliance when it is not in use. In the event that the packaging is to be
disposedof, please recycle all packaging materials where possible.
·
Safe packaging disposal
: Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach and disposed of safely.
·
Cord
: Inspect the power cord and plug, and all other parts of the appliance, for visual damage. Do not use the appliance
if anything appears to be damaged or not working properly. In case of damage,return the product to your local store.
·
Documentation
: Make sure you have read and understood all instructions and warnings in this manual. Refer to the
product Overview to familiarise yourself with the product and identify all parts.Pay particular attention to the safety
instructions on the previous pages.
NOTE:
Portable electric heaters are designed forspot heating,
or as a supplementary heatsource.
They are not intended to be mainsources of
heat during the normal heating season.
1.Handle
2.Function control
3. Filter (at the back, not visible here)
4. Safety grille covering the heating elements
5.Base
6.Tip over switch
7.Power switch (at the back, not visible here)
8.Display window
To Next Page
Loading...