After turn on the heater, you can choose high heating.
5. Timer Off
Switches off the heater in present time and starts stand by mode.
MAINTENANCE
Turn off the circuit breaker before maintenance and let the unit cool
completely.
• To keep the heater clean, the outer shell may be cleaned with a soft,
damp cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or
rough brushes to clean the heater. This may cause damage or deterioration to
the surface of the heater.
• Although this heater is outdoor approved(Balconies and patios), DO
NOT immerse the heater in water for your safety. Wait until the unit is
completely dry before use.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair
of service:
• Check if electricity to the main fuse is working.
• Make sure the power switch is turned on.
• Check if the plug is in good contact with the main power supply.
• Check whether it was put in the right way, please do NOT put it upright.
• Check whether the remote control battery low.
。
To Previous Page
Loading...
