2
PLACEMENT INFORMAPLACEMENT INFORMA
PLACEMENT INFORMAPLACEMENT INFORMA
PLACEMENT INFORMA
TIONTION
TIONTION
TION
• Do not use this unit in places which are extremely hot, cold, dusty, or
humid.
• Do not restrict the air flow of this unit by placing it somewhere with poor air flow,
by covering it with a cloth, or by placing it on bedding or carpeting.
SAFETY INFORMASAFETY INFORMA
SAFETY INFORMASAFETY INFORMA
SAFETY INFORMA
TIONTION
TIONTION
TION
• When connecting or disconnecting the AC power cord, grip the plug and
not the cord itself. Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect
the AC power cord.
CONDENSACONDENSA
CONDENSACONDENSA
CONDENSA
TION INFORMATION INFORMA
TION INFORMATION INFORMA
TION INFORMA
TIONTION
TIONTION
TION
• When left in a heated room where it is warm and damp, water droplets or
condensation may form inside the unit. When there is condensation inside
the unit, the unit may not function normally. Let the unit stand for 1-2 hours
before turning the power on, or gradually heat the room and allow the unit
to dry before use.
FCC INFORMAFCC INFORMA
FCC INFORMAFCC INFORMA
FCC INFORMA
TIONTION
TIONTION
TION
WARNING:WARNING:
WARNING:WARNING:
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
NOTE:NOTE:
NOTE:NOTE:
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
SAFETY PRECAUTIONSSAFETY PRECAUTIONS
SAFETY PRECAUTIONSSAFETY PRECAUTIONS
SAFETY PRECAUTIONS
* SEE REAR OF UNIT FOR GRAPHIC SYMBOLS ** SEE REAR OF UNIT FOR GRAPHIC SYMBOLS *
* SEE REAR OF UNIT FOR GRAPHIC SYMBOLS ** SEE REAR OF UNIT FOR GRAPHIC SYMBOLS *
* SEE REAR OF UNIT FOR GRAPHIC SYMBOLS *
WARNING: TO REDUCE THE RISK OFWARNING: TO REDUCE THE RISK OF
WARNING: TO REDUCE THE RISK OFWARNING: TO REDUCE THE RISK OF
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVEELECTRIC SHOCK, DO NOT REMOVE
ELECTRIC SHOCK, DO NOT REMOVEELECTRIC SHOCK, DO NOT REMOVE
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLECOVER (OR BACK). NO USER-SERVICEABLE
COVER (OR BACK). NO USER-SERVICEABLECOVER (OR BACK). NO USER-SERVICEABLE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TOPARTS INSIDE. REFER SERVICING TO
PARTS INSIDE. REFER SERVICING TOPARTS INSIDE. REFER SERVICING TO
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.QUALIFIED PERSONNEL.
QUALIFIED PERSONNEL.QUALIFIED PERSONNEL.
QUALIFIED PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCKWARNING: TO PREVENT FIRE OR SHOCK
WARNING: TO PREVENT FIRE OR SHOCKWARNING: TO PREVENT FIRE OR SHOCK
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TOHAZARD, DO NOT EXPOSE THIS UNIT TO
HAZARD, DO NOT EXPOSE THIS UNIT TOHAZARD, DO NOT EXPOSE THIS UNIT TO
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. DO NOT PLACERAIN OR MOISTURE. DO NOT PLACE
RAIN OR MOISTURE. DO NOT PLACERAIN OR MOISTURE. DO NOT PLACE
RAIN OR MOISTURE. DO NOT PLACE
OBJECTS FILLED WITH LIQUIDS ON OROBJECTS FILLED WITH LIQUIDS ON OR
OBJECTS FILLED WITH LIQUIDS ON OROBJECTS FILLED WITH LIQUIDS ON OR
OBJECTS FILLED WITH LIQUIDS ON OR
NEAR THIS UNITNEAR THIS UNIT
NEAR THIS UNITNEAR THIS UNIT
NEAR THIS UNIT
..
..
.
CAUTION: CAUTION:
CAUTION: CAUTION:
CAUTION:
DANGER OF EXPLOSION IFDANGER OF EXPLOSION IF
DANGER OF EXPLOSION IFDANGER OF EXPLOSION IF
DANGER OF EXPLOSION IF
BABA
BABA
BA
TTERTTER
TTERTTER
TTER
Y IS INCORRECTLY IS INCORRECTL
Y IS INCORRECTLY IS INCORRECTL
Y IS INCORRECTL
Y REPLACED.Y REPLACED.
Y REPLACED.Y REPLACED.
Y REPLACED.
REPLACE ONLREPLACE ONL
REPLACE ONLREPLACE ONL
REPLACE ONL
Y WITH THE SAME ORY WITH THE SAME OR
Y WITH THE SAME ORY WITH THE SAME OR
Y WITH THE SAME OR
EQUIVALENT TYPE.EQUIVALENT TYPE.
EQUIVALENT TYPE.EQUIVALENT TYPE.
EQUIVALENT TYPE.
The symbol forThe symbol for
The symbol forThe symbol for
The symbol for
Class II (DoubleClass II (Double
Class II (DoubleClass II (Double
Class II (Double
lnsulation)lnsulation)
lnsulation)lnsulation)
lnsulation)
INVISIBLE LASER RADIAINVISIBLE LASER RADIA
INVISIBLE LASER RADIAINVISIBLE LASER RADIA
INVISIBLE LASER RADIA
TIONTION
TIONTION
TION
WHEN OPEN.WHEN OPEN.
WHEN OPEN.WHEN OPEN.
WHEN OPEN.
AVOID EXPOSURE TO BEAMAVOID EXPOSURE TO BEAM
AVOID EXPOSURE TO BEAMAVOID EXPOSURE TO BEAM
AVOID EXPOSURE TO BEAM
..
..
.
This productThis product
This productThis product
This product
contains a lowcontains a low
contains a lowcontains a low
contains a low
power laser device.power laser device.
power laser device.power laser device.
power laser device.
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
AVIS
RISQUE DE CHOC ÉLECTRIQUE NE
PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a triangle
alerts you to the presence of important
operating, servicing and maintenance
instructions in this user’s manual.
The lightning flash with an arrowhead
within a triangle alerts you to
uninsulated dangerous voltage within
the product's enclosure that could
cause an electric shock.
To Next Page
Loading...
