TruVue 70140WN User Manual

TruVue Sony EFFIO-E CCD
700TVL Colour Camera
SPECIFICATION
PACKING LIST
No Name Model Number
2.
User Guide NA 1
1. 700TVL Vandal proof IR Dome
Colour Camera
70140WN
1
3
Mounting Hardware NA 1
Notes: Before attempting to connect or
operate this product, please read these
instructions carefully and save this manual
for future reference.
Do not attempt to disassemble the
camera. If the camera fails to work,
please contact your local Security
Merchants branch
Model
70140WN
Pick up Sensor
1/3" SONY EFFIO-E Exview HAD CCD II
Effective Picture Elements
(H×V)
PAL:1020(H)x596(V)
Horizontal Resolution
700 TV Line
Minimum Lux
0.001 Lux
0Lux (with IR LED ON)
S/N Ratio
52dB
Scanning System
PAL 2:1 interface
Synchronous System
Internal, Negative sync.
Auto Electronic Shutter
PAL: 1/50s~1/100,000s
Gama Characteristic
0.45
IR Distance
30 Meters (with ￠ 5X36 PCS Infrared LED)
Video Output
1Vpp, 75Ω
Auto Gain Control
Auto (adjustable)
Power /
//
/ Current DC12V(+/-10%) / 500mA
Lens/Angle
2.8~12mm Fixed Iris Manual Zoom Lens
/90~30 Degree
Dimension (mm)
131(Dia) x 93(H) (mm)
Weight (g)
800
IP Rating
IP66
Operating Temperature
-10~+45 ℃ RH95% MAX
OSD Menu Joystick control
Min Illumination
CAUTIONS, WARRANTY TERMS & CONDITIONS
Thank you for purchasing this quality product. Before operating the product
please read the instruction manual carefully to ensure proper use of the
product. Please store this instruction manual in a safe place for future
reference. Camera will not be covered under warranty if the following is not
adhered to.
1. Power supply for camera
(1)Use recommended 12VDC regulated power supply only
(2)Be sure to connect each power lead from the 12VDC power
supply to the appropriate terminal marked with “+” and “-“. “+” is for
+12VDC and “-“is for -12VDC. Wrong connection will cause malfunction
and damage to the video camera and will not be covered under manufacturers
warranty
2. Operating conditions and locations
1) Do not attempt to aim the camera at the sun or any other extremely
bright objects. This will cause smearing to appear irrespective of whether the
camera is operating or not. This can and will damage the CCD (Charge
Coupled Device) sensor.
(2)Do not mount the camera in the following locations.
i) Subjected to extremely high or low temperatures. Make sure the
cameras’ operating temperature range does not exceed -10
℃ ~ +45 ℃
ii) Subjected to high levels of humidity and dust. (Operating humidity
range: maximum 95 % (non condensation))
iii) Where there are large amounts of water vapours and steam.
iv) Subjected to excessive vibrations.
v) Avoid installing near wireless communication devices which emit
strong electromagnetic fields, some irregularity such as noise on video image
may occur.
3. Do not allow the camera to be subjected to strong impacts or shocks. The
camera could be damaged by improper handling or storage.
If any of the above should occur, immediately turn off the camera power
supply and consult your dealer/installer.
NB: Never attempt to disassemble or modify the camera.
Alexandria Tel 02 9693 5144,
Northmead Tel 02 9890 5300
Mt Waverley Tel 03 9558 8455,
Tullamarine Tel 03 9338 2427
WA: Tel 08 6462 8080
QLD: Tel 07 3552 5966
SA: Tel 08 8297 5555
Vandal Proof Weather Proof Indoor/
Outdoor IR Colour/BW Dome
Camera with OSD menu

TruVue 70140WN Specifications

General

Brand	TruVue
Model	70140WN
Category	Security Camera
Language	English

Summary

SPECIFICATION

Camera Model

Camera model number.

Image Sensor Details

Details of the image sensor used in the camera.

Resolution & Low Light

Specifies image clarity and low-light performance.

IR Range & Dimensions

Details infrared distance and physical camera size.

Durability Ratings

Information on water/dust resistance and operating temperatures.

PACKING LIST

Package Contents

Lists all items included in the product package.

CAUTIONS & WARRANTY

Power Supply & Operation

Guidelines for power connection and environmental operation.

Handling Precautions

Advice to prevent physical damage to the camera.

PRODUCT INFORMATION

Camera Overview

General introduction and key features of the camera.

CAMERA SETUP & OPERATION

Connection Diagram

Visual guide for system wiring.

OSD Menu Control

Explains the interface for camera configuration.

TROUBLESHOOTING GUIDE

Common Issues & Fixes

Solutions for common operational and display anomalies.

SAFETY & WARNINGS

Electrical Safety

Crucial safety advice for electrical hazards.

Operating Precautions

Guidelines for safe operating environment and maintenance.