TRX RIP - TRX RIP Group Training Station Safety and Components; TRX RIP Group Training Station Components; TRX RIP Group Training Station Assembly Tools

THE RIP GROUP TRAINING STATION IS A HEAVY PIECE OF
EQUIPMENT. IT IS INTENDED TO SUPPORT SIGNIFICANT
WEIGHT DURING ROUTINE USE AND SHOULD BE SECURELY
ASSEMBLED AND USED ON A FLAT SURFACE OF SUITABLE
CONSTRUCTION. FAILURE TO TAKE PROPER CARE IN SITE
SELECTION, ASSEMBLY OR INSTALLATION CAN LEAD TO
SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE.
Read these instructions carefully before proceeding and follow
the installation directions carefully to minimize the risk of injury or
property damage. This information is not intended to be exhaustive,
but is only intended for illustrative purposes.
BEFORE STARTING
ASSEMBLY
A 1/8” allen wrench
GATHER THE FOLLOWING TOOLS
Weight plates
Group Station Tower
(10) Clips
Dome
(10) Nuts and bolts
COMPONENTS
Base Plate
45 lbs
45 lbs
45 lbs
45 lbs
(20 kg)
(20 kg)
(20 kg)
(20 kg)