TSC ALPHA 4L User Manual

Printer Overview
Keys and LEDs Indication
Keys
Function
− Press and hold for 2-3 seconds to turn on the printer.
− Press and hold for 2-3 seconds to turn off the printer.
− Ready status: Feed one label
− Printing status: Pause the print job
LEDs
Status
Indication
Green (solid)
Full charged
2/3 charged level
Green (solid)
1/3 charged level
Green (blinking)
Low battery
Amber (solid)
Battery is charging
Blue (solid)
Bluetooth device is ready
Blue (blinking)
Bluetooth device is communicating
Blue (solid)
WiFi device is ready
Blue (blinking)
WiFi device is communicating
Note: WiFi device is optional.
Off
Printer is ready
Green (blinking)
− Printer is paused
− Printer is downloading data
Red (solid)
− Media cover is open
− Out of memory
Red (blinking)
− No paper
− Paper jam
Install Belt Clip and Battery
Page 1 of 2
Feed button
Power on/off button
Printer status
LED indicator
Power LED
indicator
Battery status LED
indicator
Media holder
lock switch
Media cover
Media holder
Label roll guard
Print head
Print head
Media cover
release button
Platen
Platen
Li-ion battery
Battery open clasp
Belt chip
USB interface
USB interface
Power jack
MicroSD
card socket
Quick Installation Guide

TSC ALPHA 4L Specifications

General

Print Technology	Direct Thermal
Print Resolution	203 dpi
Print Speed	4 ips (inches per second)
Max Print Width	4.09 inches (104 mm)
Connectivity	USB 2.0, Bluetooth
Media Width	2 in ~ 4.4 in (50 mm ~ 112 mm)
Media Type	Black Mark
Media Thickness	0.0024 in ~ 0.0075 in (0.06 mm ~ 0.19 mm)
Media Core Diameter	1 in (25.4 mm)
Label Length	10 mm (0.39 in)
Power	100-240V AC, 50/60Hz

Summary

Printer Overview and Controls

Printer Components

Overview of physical components like power button, LEDs, media holder, and battery.

Keys and LEDs Status

Functions of printer keys and status indications for LEDs (battery, connectivity).

Printer Setup and Operation

Install Belt Clip and Battery

Instructions for attaching the belt clip and inserting the battery.

Loading the Media

Step-by-step guide for loading standard media rolls into the printer.

Loading Media in Peel-off Mode

Procedure for loading media specifically for peel-off dispensing.

Charge the Battery

Instructions on how to charge the printer's Li-ion battery using the power adapter.