TSC KP-200 Plus - KP-200 Plus COM2 Setup; KP-200 Plus Key Sound Setting

Baud rate: 2400/ 4800/ 9600/ 19200/ 38400/ 57600
Parity: None/ Even/ Odd
Data bits: 7/ 8/ 9
Stop bit: 1/ 2
COM2 setup
This utility is used to set the COM1 settings. (BAUD RATE/ PARITY/ DATA
BITS/ STOP BIT) Please refer to section 8 for default setting.
Baud rate: 2400/ 4800/ 9600/ 19200/ 38400/ 57600
Parity: None/ Even/ Odd
Data bits: 7/ 8/ 9
Stop bit: 1/ 2
Key sound
This utility is used to set the ON or OFF for keypad sound.
SETUP MENU:
COM1 SETUP
SETUP MENU:
KEY SOUND