2 Model 3062 Diffusion Dryer
Unpacking
The Diffusion Dryer consists of a diffusion dryer tube with water
trap and fittings attached and accessories, including the following:
Table 1
Packing List for the Model 3062 Diffusion Dryer
Qty. Item TSI Part No.
1 Diffusion Dryer 3062
2 Bracket special dryer 1206089
1 Cap, filling 1304017
3 Bags of silica gel desiccant 1403002
2
Latch Rubber Band 3½
× ¼
2205003
2 Gasket Rubber, 2.938” x 1.938”
diameter
1704083
10 ft Tubing polyethylene ½ OD 3929439
4
Panhead Screws 10-32
×
3
⁄8 SS
5113090
4 Nut 10-32 Lock “Kep” 5310001
1 Instruction manual 1933062
If anything is missing or appears to be damaged, contact your TSI
representative or contact TSI Customer Service (Particle
Instruments) at 1-800-874-2811 (USA) or (651) 490-2811.
Installation
Two cradles with mounting screws and nuts are included with the
dryer. They are used to mount the dryer horizontally in a
convenient location. Two large rubber bands are provided to secure
the dryer to the cradles.
To fill the dryer with silica gel, see “Installing the Silica Gel” later in
this manual.
To Next Page
Loading...