Model 3062 Diffusion Dryer 9
Specifications
The following specifications—which are subject to change—describe
the most important data of the instrument’s major components.
Table 3
Specifications of the Model 3062 Diffusion Dryer
Flowrate
0 to 4 L/min
Maximum pressure
415 kPa (60 psig)
Relative humidity at exit
20% when incoming R.H. is 60%
Desiccant
Type
Capacity
Silica gel (blue indicator crystals mixed
with clear; all go clear when wet)
1 kg
Fittings
Swagelok 0.5-in. tube connector (inlet and
outlet)
Dimensions
Length
Diameter (cylinder only)
53.5 cm (17 in.)
8.3 cm (3.5 in.)
Weight
3 kg (6.6 lb)
Specifications are subject to change.
To Next Page
Loading...