TSI Instruments AEROTRAK+ 7510 User Manual

3–8 AeroTrak
®
+ Remote Particle Counter Operation Manual
Tech Page—Configuration (Config) Tab
The Configuration page is used to input the sampling parameters and set
the system clock.
Label
Function
Sample Interval (s)
Sets the length of time for each sample
Start Delay (s)
Sets the delay time before a sample begins
Hold Time (s)
Sets the delay time between consecutive samples
Run Mode
Select between Auto or Manual run modes.
Auto model uses Sample Interval, Start Delay and
Hold Time.
Manual mode will start a sample and log the sample
when sample is stopped manually.
Date and Time
Sets the device date and time. To sync the device time
with the computer time, click Sync to computer. The
Saved button in the “Date and Time” row is used if time
and date is manually entered to send the new time and
date to the remote.
NOTE: The Save button in the Sample Configuration
row is used to send the new Sample Length,
Start Delay, Hold Time, and Run mode to the
remote.

TSI Instruments AEROTRAK+ 7510 Specifications

General

Brand	TSI Instruments
Model	AEROTRAK+ 7510
Category	Cash Counter
Language	English