TSi Power ATS-500 Series Startup Guide

TSI Power Corporation April, 2021 SG03501
ATS-500 Series Rev. 3
Page 1 of 5
START-UP GUIDE
TSI Power Model Number: ATS-500 Series
DANGER :
Make sure unit is de-energized before beginning.
CAUTION:
These instructions must be followed or board failure will result.
Caution: No user serviceable parts.
Caution: Only a trained engineer, electrician or technician should perform this procedure.
Caution: For personnel safety, remove metallic watches and rings.
Always wear protective eye glasses, insulated gloves and insulated shoes.
This is a quick reference start-up guide. Go to TSI Power's website or contact TSI directly to obtain the ATS-500 Series
Product Manual. (TSI Power's contact information is on page 5.)
IMPORTANT SAFETY INSTRUCTIONS: SAVE THESE INSTRUCTIONS – This manual contains important
instructions for the ATS-500 Series that should be followed during installation and maintenance of the ATS.
Please inspect the unit for visible shipping damage (such as damaged case or broken parts)
Table of Contents Page
Safety Alerts....................................................................................................................................................................... 2
Tools and Test Equipment Required................................................................................................................ 2
Voltage Selection......................……………………………………………………………………...................................................... 2
Remote Status / Alarm Monitoring..…………………………………………………….……….…...................................... 2
Power-Up Procedure……………………………….…………………………………….…………..................................................... 4
Contact Information...…………………………………………………………………………………................................................... 5

TSi Power ATS-500 Series Specifications

General

Brand	TSi Power
Model	ATS-500 Series
Category	Switch
Language	English