Tsonic T3-1 Series - Installation Instruction; Installation Point Selection; Installation Procedure

2. Installation Instruction
2.1 Choose the installation point
Straight pipe installation requirement(D is pipe diameter), upstream ≥ 3D, downstream 0D,
make sure the pipe full of liquid completely.
Correct installation point Wrong installation point
At the lowest point in the pipe system;
Vertical upward or slanted upward pipe;
Upstream straight pipe≥3D
At the highest point in the pipe system;
Vertical downward or slanted downward
pipe; Upstream straight pipe＜3D
ps：Arrow direction is fluid flow direction.
2.2 Installation Method
1.Confirm installation dimension
2.Cup off
Water meter length L+2pcs sealing gasket thickness
+
10mm
3.Install matching flanges
4.Flanges position
5.Flanges welding
6.After cooling, install with sealing gasket,
fasten screws
Three screws on an average positioning flanges,
spot-welding fixing
Take off the water meter,
finish full welding of the flange