Tsun Talent-MG2-WP - User Manual

Talent-MG2-WP
Talent-MG2-GP
TSUNESS Co., Ltd
STORE THE FUTURE
User Manual

Summary

Read Me First

Warning

Safety instructions for installation, troubleshooting, and repairs of the monitoring system.

Contact Information

Information for contacting the TSUN Service line for technical problems.

Talent-MG2 Monitoring System Overview

Packing List

Lists the components included in the Talent-MG2 monitoring system package.

Installation Overview

Technical Data

Installation Steps

Step 1: Install Antennas

Instructions for connecting antennas to the Wi-Fi/GPRS and 2.4G ports.

Step 2: Insert SIM Card

Procedure for inserting a SIM card into the SIM Card Slot (for Talent-MG2-GP).

Step 3: Mount Bracket

Instructions for screwing the bracket onto the wall for device mounting.

Installation Steps (Continued)

Step 4: Attach Monitor Device

Guide on attaching the monitor device to the bracket securely.

Step 5: Power On

Instructions for powering on the monitor device.

Wi-Fi Configuration

Step 1: Connect Wireless Name

Connecting to the MG2-W wireless network via computer or mobile phone.

Step 2: Open Configuration Page

Accessing the Wi-Fi configuration page by entering the IP address in a browser.

Step 3: Enter Wi-Fi Parameters

Navigating to the Wi-Fi parameter menu for configuration.

Step 4: Select SSID

Searching for and selecting the Wi-Fi name to connect to the monitoring device.

Wi-Fi Configuration (Continued)

Step 5: Enter Password and Save

Entering the Wi-Fi password and saving the configuration settings.

Step 6: Restart Device

Restarting the device for configurations to take effect.

LED Description

LED Description (Continued)

Website Configuration

Step 1: Install Microinverter & Device

Installing the microinverter system and connecting the monitoring device.

Website Configuration (Continued)

Step 2: Establish Account

Creating a new user account on the monitoring platform.

Step 3: Networking Setup

Logging into the platform and configuring the network for the monitoring system.

Website Configuration (Continued)

Step 3: Add Monitoring Device SN

Adding the Serial Number (SN) of the monitoring device to the network.

Website Configuration (Continued)

Step 4: Create a Plant

Navigating to the Plants page and creating a new plant.

Step 4: Input Plant Information

Entering basic, system, yield, and owner information for the new plant.

Website Configuration (Continued)

Step 4: Add Gateway;Logger SN

Adding the Gateway/Logger SN to the created plant.

Step 4: View Plants

Managing and viewing all created plants on the Plants page.

Website Configuration (Continued)

Step 5: Edit System Layout

Accessing the Layout page to edit the physical system layout.

Remote Active Power Control

DRM Function

Details of demand response modes supported by the system via RJ-45 connector.

Zero Export Control Function

Step 1: Confirm Export Control Type

Understanding the different types of export control for PV systems.

Step 2: Confirm Grid Type

Selecting the correct grid type based on geographical location and voltage.

Zero Export Control Function (Continued)

Step 3: Confirm CT;Meter Capacity

Ensuring CT/Meter range covers system loads and generation.

Zero Export Control Function (Continued)

Step 4: Install CHINT DDSU666 Meter

Wiring instructions for the CHINT DDSU666 Single Phase Meter.

Zero Export Control Function (Continued)

Step 4: Install CHINT DTSU666 Meter

Wiring instructions for CHINT DTSU666 Three Phase Meters (Direct Connect & Via CT).

Zero Export Control Function (Continued)

Step 5: Connect Meter to RS485

Connecting the meter to the RS485 port on the monitor device.

Zero Export Control Function (Continued)

Step 6: Set Zero Export Function

Configuring the zero export function on the monitoring platform.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The TSUN Talent-MG2-WP/GP is a monitoring system designed for microinverter installations, acting as a crucial relay station between microinverters and a monitoring server. It facilitates data collection from microinverters and enables remote operation and maintenance through control commands from the server.

Function Description:

The Talent-MG2 monitoring device communicates with microinverters via 2.4G RF wireless technology to gather data and status information. It then connects to the internet, either through Wi-Fi (for Talent-MG2-WP) or GPRS (for Talent-MG2-GP), to exchange this information with the monitoring service. This allows for the transmission of microinverter running data and system status to the monitoring server, and conversely, receives control commands from the server to enable remote management.

The device also supports remote active power control, which is essential in countries requiring generating plants to cease or limit active power output to a regulating level. This is achieved via an RS485 port using the RTU Modbus protocol.

A DRM (Demand Response Mode) function is integrated, supporting various demand response modes (DRM0/5/6/7/8 when used with TSUN microinverters) by connecting an external control device with a standard RJ-45 connector. These modes dictate actions such as operating disconnection devices, not consuming power, limiting power consumption to a percentage of rated power, sourcing/sinking reactive power, not generating power, limiting power generation to a percentage of rated power, and increasing power generation.

Furthermore, the system includes a zero export control function to comply with local grid regulations that limit PV generated power export. This function offers three types:

1. Zero Export: Limits exporting power to zero to prevent feedback to the grid.
2. Export Limit: Limits exporting power within a specified value.
3. Production and Consumption Monitoring: Provides high-accuracy measurement of PV generation.

Important Technical Specifications:

• Communication to Microinverter:
  • Signal: 2.4G RF
  • Maximum Distance (Open Space): 100m
  • Monitoring Data Limit: 99 panels
• Communication to Server:
  • Sample Rate: Per 15 minutes
  • Signal (Talent-MG2-WP): Wi-Fi (802.11b/g/n)
  • Signal (Talent-MG2-GP): GSM (850/900/1800/1900MHz)
• Communication to Meter:
  • Signal: RS485
  • Maximum Distance (RS485 Cable): 500m
• Power Supply (Adapter):
  • Type: External plug-in adapter
  • Input Voltage/Frequency: 100 to 240V AC / 50 or 60Hz
  • Output Voltage/Current: 5V DC / 2A
  • Power Consumption: 2.5W (typical), 5W (maximum)
• Mechanical Data:
  • Ambient Temperature: -20°C to +55°C
  • Dimensions (WHD mm): 20010129
  • Weight: 0.2 kg
  • Mounting System: Wall mounting / Desktop mounting
  • Indicator Light: 4 LEDs

Usage Features:

• Easy Installation: The device comes with two antennas (Wi-Fi/GPRS and 2.4G) that screw into designated ports. For the Talent-MG2-GP, a SIM card needs to be inserted. A bracket is provided for wall mounting, requiring at least two M4 screws. The device can also be placed on a table.
• Wi-Fi Configuration (Talent-MG2-WP only):
  1. Connect to the MG2-W wireless network via computer or mobile phone.
  2. Access the Wi-Fi configuration page by entering 10.10.100.254 in a browser (default username/password: 'admin').
  3. Configure Wi-Fi parameters, search for available networks, select the desired one, enter the password, and save. A restart is required for changes to take effect.
• Website Configuration:
  1. Install the microinverter system and the monitoring device, ensuring they are operational.
  2. Establish an account on the monitor website (pro.solarmanpv.com or via tsun-ess.com).
  3. Network the monitoring system by logging into the platform, navigating to "Applications → Network," and adding the monitoring device's SN.
  4. Create a plant by going to "O&M → Plants," clicking 'Create a Plant,' and inputting basic, system, yield, and owner information.
  5. Edit the system layout by accessing "O&M → Plants → [plant name] → Layout" and dragging components to match the physical layout.
• Zero Export Control Configuration:
  1. Confirm the export control type (Zero Export, Export Limit, or Production and Consumption Monitoring).
  2. Confirm the grid type (Single Phase 230V, Three Phase 230V/400V, Split Phase 120V/240V, or Three Phase 120V/208V).
  3. Confirm the CT/Meter range based on maximum load power or PV system generating power, choosing from CHINT DDSU666(60A), DTSU666(80A), or DTSU666(5A) with various CT capacities.
  4. Install the meter and CT, ensuring the CT arrow points towards the Grid.
  5. Connect the meter to the RS485 A and B ports of the monitor device. For RS485 cable lengths over 200m, a shorting jumper should be used on the first two RS485 ports.
  6. Set the zero export function on the monitor platform by navigating to "Applications → Zero-export Setting."

Maintenance Features:

• LED Indicators: The device features LEDs to indicate various statuses:
  • Power LED: Monitor device power on/off.
  • Communication LED (Server): Network communication status (connected, disconnected).
  • Communication LED (Inverter): Microinverter communication status (all connected, some disconnected, no ID).
  • Alarm LED: Fault state (normal, monitor device alarm, microinverter alarm, meter alarm).
  • All LEDs: Firmware upgrading status.
• Qualified Personnel Requirement: Installation, troubleshooting, and replacement of the monitoring system should only be performed by qualified personnel who have received training or demonstrated skills.
• Pre-installation Check: Before installation, the unit should be checked for any transport or handling damage that could affect insulation integrity or safety clearances.
• Spare Parts and Service: All repairs must be carried out using only qualified spare parts, installed by a licensed contractor or authorized TSUNESS service representative.
• Technical Support: TSUNESS provides a service line for technical problems.

Tsun Talent-MG2-WP Specifications

General

Brand	Tsun
Model	Talent-MG2-WP
Category	Microphone
Language	English