Optional Modules
Wireless LAN & Bluetooth Modules 7 - 3
7
Wireless LAN Driver Installation (Win2000)
1. Turn the Wireless Module ON/OFF switch ON.
2. If you have two wireless modules, you may need to use the key combina-
tion Fn + F12 to enable the Wireless LAN module (the Mail LED indi-
cator will be green - see “LED Power & Communication
Indicators” on page 2 - 6). If you only have the Wireless LAN module
go straight to step 3.
3. If the Found New Hardware Wizard appears, click Cancel.
4. Insert the Wireless LAN CD-ROM into the CD drive.
5. The program will run automatically.
6. Click Next > Next > Yes > Next > Next.
7. Click Yes if you wish to add a shortcut to the WLAN utility on the desk-
top.
8. Follow the instructions to install the Adobe Acrobat Reader (if you do
not already have Adobe Acrobat Reader installed) and
click Yes if asked
if you want to continue.
9. Click OK > Finish then restart the computer.
The Wireless LAN User Manual is in Adobe .pdf format (Start menu and
point to Programs > IEEE 802.11b WLAN Utility(USB) > User Manual).
Network Protocols
During the install proc-
ess you may be asked
to install some network
protocols. To do this
go to the Network and
Dial-up Connections
control panel, and dou-
ble-click Local Area
Connection. Click In-
stall (button) and click
on Protocol (or any
Services or Clients
required) and Add
(button) to select the
protocols you require.
You will need to restart
the computer after in-
stalling some Proto-
cols/Services/
Clients.
To Next Page