Tsunami TYPHOON - Temperature Setting and Adjustment; Temperature Unit Switching

To Next Page

To Previous Page

5D - TEMPERATURE SETTING

1 - WHEN THE DEVICE IS TURNED ON, YOUR TEMPERATURE WILL BE SET

AT 375º F, A FLASHING GREEN LED LIGHT WILL APPEAR AND THE OLED

SCREEN WILL DISPLAY (HEAT) TO SHOW THAT THE DEVICE IS

HEATING UP. WHEN THE INDICATOR LIGHT BECOME SOLID GREEN

THE DESIRED TEMPERATURE IS REACHED AND THE OLED SCREEN

WILL DISPLAY (WARM), NOW YOU READY TO VAPORIZE

2 - TO CHANGE YOUR TEMPERATURE SETTINGS, PRESS THE UP AND

DOWN BUTTON, YOU CAN INCREASE OR DECREASE THE

TEMPERATURE WHILE THE DEVICE IS HEATING. THE TYPHOON

DEVICE IS CAPABLE OF REACHING ANY TEMPERATURE WITHIN THE

RANGE OF 300º F - 435º F (149º C - 224º C)

3 - PRESS AND HOLD THE UP AND POWER BUTTON SIMULTANEOUSLY

FOR 3 SECONDS TO SHIFT THE TEMPERATURE TO FAHRENHEIT

SYSTEM (F)

4 - PRESS AND HOLD THE DOWN AND POWER BUTTON SIMULTANEOUSLY

FOR 3 SECONDS TO SHIFT THE TEMPERATURE TO CELSIUS

SYSTEM (C)

5 - THE TYPHOON DEVICE COMES EQUIPPED WITH A MEMORY DATA

FUNCTION, WHEN IT TURN ON AGAIN IT WILL AUTOMATICALLY HEAT

TO THE LAST HEATING TEMPERATURE SETTING

6 - FACTORY DEFAULT SETTING TEMPERATURE IS 375º F