TTC FIREBERD 6000A User Manual

FIREBERD 6000 Setup
2M In-Service Monitoring
I Part 1 - Interface Setup
1 2MINx64 Access the 2mx64 interhce.
" P
2 CONHG Acw the CONFIGURATION menu.
---
2a PRAME
Scroll through the list until you reach the appropriate fnming of
your
circuit (e.g., bed, unframed, CRC4, or TS16).
2b MORE
2c RmULT
2d INFWr
2e A
3 MODE
3a lmL2M
4 m
5 ANALYSIS MODE
See additiond selections.
ScmU through the list and set to LIVE.
Scroll through the list and set to MON.
Press the A (upurow key) on the keypad to return to the
2MINx64 main menu.
Access the MODE menu.
Monitor the entire ZM bandwidth.
Press BNIHll on the keypad to return to the main menu.
Select COmOUS.
I Part 2 - PerFonning the Test
1
Press BESWRT to deu alvms and b& the test. Verify that:
A. PIREBERD 6000's PATlBRN ~Yhk LED is illuminated (indicating a @ is p-1).
B. PIREBERI) 6000's INRI SYNC LED is illmimed (ifINRI SYNC is not illuminated, go back to Step 2. and select
the appropriate he format).
TTC Technical Support
180063&2049
m-2M.In-Senice/Cudl.1/3.97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

TTC FIREBERD 6000A Specifications

General

Brand	TTC
Model	FIREBERD 6000A
Category	Test Equipment
Language	English