TTC FIREBERD 6000A User Manual

FIREBEIRD GOO0 Setup
TllFTl- Voice and Signaling
TkfdbwingptDcadum wtliw bow to connect tbe PLRBBeRD 6WO with a 4144lM i&rjface to tbe netumr.4 in oriier toperfanr an
d-to-end Tlml Out-of-Seruice Voice andSigding test. Please read tk entimpmcedumBBPI)RBstarting,
. W~-SetuptbeP~6WO~mnecringtotknetumr.4.
4 conNnuou.dy~'ng tk appropriate sopkey, p you2 moll tbrougb tk menu untilp raacb yarr &siradsetting.
A (up- hey) is used to return to tkprevious menu sektion.
Use tk dlBMIsvphey to moll tbmugh the options untilyou reach INIF SETOP (LED beside it is illumiMted). Tben f& tbe
stspsbelau:
I
Part 1 - Interface Setup
Tlml
corn
FRMlE
CODE
m
MORE
RESULT
LBO
m1
A
ERRINS
A
MODE
MORE
VOICE
SEL<
Access the Tlm1 interface. w
Access the CONFIGURATION menu.
ScmU through the list
until you reach the appropriate framingof
your circuit (e.g., D4, ESF, SLP-96, or Om).
Scmll through the list until you reach the appropriate dmg of
your circuit
(e.g., BSZS or AM).
Scroll through the list and set to TERM.
See additional selections.
Scroll through the
list and set to SID.
Scroll through the list and set the Line Build Out to 0 dB.
Scroll through the list and set to m.
Press the A (up-mow key) on the keypad to rrturn to the
Tlm1
main m&u.
Set to om.
Press the A (up-amnv key) on the keypad to rehrrn to the
_I3
TlmI main menu.
I ml
Access the MODE menu.
--I
See additional selections.
Places the PlREBERD 6000 into VOICB mode
Pm to choose between setting your IX channel or your RX
w&iJ
channel (toggle between RX=<TX-<, and TX-<RX=<.)
(continued on back)
@ 1997 Telffommunionons Tffhniqua Corpanfion. M rights reserved
TTC Technical Support
1-800-638-2049
FB6000-Tl.FTl.Voice/Cud1.1/3.97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

TTC FIREBERD 6000A Specifications

General

Brand	TTC
Model	FIREBERD 6000A
Category	Test Equipment
Language	English