EasyManua.ls Logo

ttec SoundBeat Prime - Using the Earphones

ttec SoundBeat Prime
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Function Button Sound (Speakers) Status Indicator
Incoming Call -- Beep The blue light will stay on.
Answering a Call Press once the Smart button to
accept the call
Beep The blue light blinks once every 5 seconds
Answering a Second Call Double click the MF button Beep The blue light blinks once every 5 seconds
Rejecting a Call Double click the MF button Beep Blue light goes out
• You can directly reject a second call from another phone connected during the call.
Ending a Call Press once the Smart button Beep Blue light flashes 2 times
Voice Call Press the MF Button for 2 seconds Beep Blue light flashes 1 time
• Say the voice label after hearing a short beep. Your mobile phone needs to have a voice label registration.
Redialing the Number
Last Dialed
Double Click the MF Button Beep The blue light will stay on
Resetting/Deleting the
Pairing History
Keep the MF and Volume Down “-”
buttons pressed for 10 seconds
Beep The purple light will stay on
Out of Range Warning -- Beep The red light blinks once every 5 seconds
• The earphones will automatically reconnect within 10 minutes; otherwise, it will turn off. If automatic connection is n ot supported, press
the Smart button once.

Related product manuals