TTS TEMPO - Page 9

4 LIGHTS ALTERNATE CROSSROAD PROGRAMMING
Each light turns green one after the other
Selection
Validation
Selection
Validation
■ Select the red light timing with the + and -
(select) user-defined keys.
■ Validate.
Red light programming
Selection
Validation
STEP 3
Traffic light 1 green light
programming
■ Select the green light timing (flashing
orange) of the 1
st
traffic light with the + and -
(select) user-defined keys.
■ Validate.
▼
▲
5s
10s
15s
…
60s
Selection
Validation
STEP 4
Traffic light 2 green light
programming
■ Select the green light timing (flashing
orange) of the 2
nd
traffic light with the + and -
(select) user-defined keys.
■ Validate.
You must hear a double BEEP.
▼
▲
5s
10s
15s
…
60s
Validation
Repeat this operation for the third and
fourth light.
Traffic
light 1
Traffic
light 2
Traffic
light 3
Traffic
light 4
STEP 1
STEP 2
LIGHT: 12,0V
FLASHING M
CYCLE:
CROSSROAD 4T
CROSSROAD 4T
RED:25s
CROSSROAD 4T
GREEN 1:10s
CROSSROAD 4T
GREEN 2:15s
CROSSROAD 12,0V
4T GREEN:25s P1m
CROSSROAD 12,0V
4T GREEN:25s P2a
CROSSROAD 12,0V
4T GREEN:25s P3a
CARREFOUR 12,0V
4T GREEN:25s P4a
Axe 1
Axe 2
Traffic
light 3
Traffic
light 1
Traffic
light 4
Traffic
light 2
Repeat this step for the light n°3 and n°4.
▼
▲
5s
10s
15s
…
60s
9
Mode selection
■ Select « Crossroad 4T » mode with the +
and - (mode) user-defined keys.
■ Validate.
■ Switch on the remote control
■ Direct it to the window display symbol
STEP 5
Validation of the cycle on traffic lights 2, 3 and 4
You must hear a double BEEP.
■ Go to the 2nd traffic light
■ Direct the remote control to the window
display symbol
■ Validate.