To clean the unit use a clean lint free cloth
lightly sprayed with a detergent which is not
foamy, alcoholic or abrasive.
Tua Viso is supplied with a pair of sponge domes
already fitted for use. The sponge domes are
hand washable. An anti-microbial hand wash is
the ideal cleansing medium; use tepid water and
always remember to rinse through thoroughly
with clean water. You only need to wash the
sponge domes when they become dirty so you
should not need to wash them after every use
(unless you use your Tua Viso over makeup).
You are provided with six spare sponges with
your Tua Viso. If it appears that you have only
two, this is because they are all fitted together;
simply separate them out.
You should replace the sponge domes only
when they have worn thin and have lost
their cushioning effect.
Proceed as follows to remove the sponge domes
from your Tua Viso and re-fit with washed or
replacement sponge domes:
Switch off the unit, remove the rubber
reservoir caps and empty out any water left
in the reservoirs.
Turn the bayonet-fit rings clockwise and extract
them (fig. 1); do not force the turning;
the bayonet-fit rings turn only for few
millimetres to lock or unlock; remove the
sponge domes from the rings to then wash
or replace. If necessary, clean the surface of
the spherical steel electrodes and the various
components with a clean cloth. If replacing the
sponge domes, it is much easier if you wet the
MAINTENANCE
Cleaning
And Sponge
Replacement
To Next Page
Loading...