To Next PageTo Next Page
Need help?Do you have a question about the Tube Works 6125 and is the answer not in the manual?
Overview of the powerful, dynamic, and affordable 12AX7 tube guitar combo amplifier with rich tone qualities.
Standard 1/4" input with 500K ohm impedance, high-pass filter, and RFI filter for optimal response.
Push-button switch for selecting between Clean and Tube Overdrive channels using noiseless FET switches.
Monolithic FET network for a natural, open, and articulate clean tone suitable for any musical style.
Utilizes a real 12AX7A dual triode preamp tube and servo-feedback for warm, rich overdrive tones.
Loop feedback control for wide-range drive levels, allowing subtle to aggressive tones based on playing style.
Sets the overall volume for the Tube Overdrive channel with an exceptionally low noise floor.
Vintage-style passive network where tone is adjusted by cutting from maximum positions.
Controls the amount of Accutronics 3-spring reverb, blending with the effects return signal.
Connects standard headphones (8-6W ohm), disabling the internal speaker for silent practice.
Turns the AC mains power on and off, indicated by a green LED.
Send/return jacks for connecting outboard signal processing equipment.
General| Brand | Tube Works |
|---|---|
| Model | 6125 |
| Category | Amplifier |
| Language | English |
