Getting Started
This installation manual supports the current Tuff Stuff Shower tent. Remove Shower tent
from box
and place on a clean surface.
STEP 1
1. Use the shower tent L brackets to attach to
your designed mounting points
2. Make sure that the shower tent is secure
and does not move when mounted
STEP 2
1. Unzip the Shower tent cover. The cover is
there to protect the equipments and
should at all times while traveling be closed
and secure.
2. When traveling make sure you check the
zips are secure and if in rough weather use
a zip-tie to hold them together.
STEP 3
1. Move cover securely out of the way by
placing it on the top of the shower tent
bracket.
2. The cover is attached to the bracket and
will not be able to be removed
To Next Page
Loading...