TNT SERIES PRESSURE WASHER OPERATOR’S MANUAL
7
HOW TO USE THE OPTIONAL
DETERGENT INJECTOR
The machine can siphon and mix detergents with the use
of Landa's detergent injector kit.
1. Pull injector quick coupler collar back and secure on
discharge nipple. Injector valve body arrow should
point in direction of flow.
2. Connect high pressure hose to injector discharge
nipple securing quick coupler.
3. Start machine as outlined in Operating Instructions.
4. Place detergent pick-up tube into container of deter-
gent.
5. Turn pressure control handle counterclockwise on
the variable pressure wand. This lowers the pres-
sure by directing the water flow through the soap
nozzle and allows the detergent injector to siphon
soap.
6. Open spray gun. Water detergent ratio is approxi-
mately 15 to 1.
7. When you finish washing, rinse by simply turning
the variable pressure wand control handle clockwise
to increase pressure.
NOTE: The detergent injector will not siphon deter-
gent with the water flowing through the high pres-
sure nozzle at the end of the wand.
8. For clean up, place detergent c v tube into container
of clear water and follow steps 4 and 5 to prevent
detergent deposits from damaging the injector.
Detergent Injector
Discharge
Nipple
Quick
Coupler
High Pressure
Nozzle
Variable Pressure
Control Wand Handle
Spray Gun
Detergent
Bucket (Not
Included)
Detergent
Pickup Tube
Detergent
Bucket (Not
Included)
Soap Nozzle
To Next Page
Loading...