TUMAC EL7.AC.PLC - User Manual

1
MAINTENANCE
EL7 electrical box for controlling
automatic distribution units
consisting of electromagnetic vibrators
The different versions of the EL7 control box for controlling automatic distribution units
conform to EEC Directives 93/68 and 89/336 (EMC Electromagnetic Compatibility) and
EEC Directive 73/23 (electrical safety – low voltage)
TUMAC S.r.l.
Via della Liberazione, 33/35 – 20098 – S. Giuliano Milanese (MI) Italy
Tel. +39 0298281013 – fax +39 0298281035

Summary

Introduction

General Instructions

Connecting Parts on Lid

Card Usage Description

Wiring

Details on connecting the EL7 control box cards and components.

Vibration Frequency Variation

Procedure for adjusting the vibrator's frequency settings.

Setting Vibrator Speed

Adjusting minimum and maximum vibrator speeds via potentiometer or PLC.

Vibration Sensor Fitting and Use

Time Management Card SE Instructions

Sensor Input Configuration

Configuring sensor types (PNP/NPN) and jumpers for card functions.

Vibrator ON-OFF and STOP Delay

Control for switching the vibrator ON/OFF and setting the stop delay.

Vibrator START Delay

Setting the delay for vibrator start-up operations.

TUMAC EL7.AC.PLC Specifications

General

Brand	TUMAC
Model	EL7.AC.PLC
Category	Control Unit
Language	English