Need help?Do you have a question about the Tume KL 2500 and is the answer not in the manual?
Introduces the TUME KL 2500 and KL 3000 seed drill models.
Specifies the manufacturer, address, and compliance with relevant machine directives and standards.
Explains manual presentation, illustration variations, and safety requirements for machine covers.
Details essential safety rules for operating, maintaining, and repairing the machine.
Covers safe tractor connection, line management, and general hazards during operation.
Describes the types of seeds and fertilizers the drill can sow and its general operational capabilities.
Details various coulter types and their suitability for different soil conditions and tillage methods.
Step-by-step instructions for securely connecting the TUME KL drill to a tractor using the draw bar.
Highlights critical safety checks for three-point linkage, including front axle weighting and brake interconnection.
Provides advice on efficient driving patterns and cornering to minimize wear and optimize sowing.
Instructs on checking for coulter blockages, line status, and monitoring seed/fertilizer levels.
Emphasizes efficient seed handling for large containers and rationalizing sowing time.
Specifies maximum transport speeds for empty and full containers and road conditions.
Outlines methods for checking remaining seed and fertilizer levels in the containers.
Describes manual filling techniques, safety warnings, and maximum filling capacities for the drill.
Details how to empty the fertilizer hopper using coulters and the feeding system.
Describes the procedure for emptying the seed hopper via coulters or calibration troughs.
Details the process for emptying the seed hopper using coulters or calibration troughs.
Warns about using compressed air for cleaning and the need for protective gear.
Introduces the groove feed system for seeds, including feed rollers, flaps, and chambers.
Explains how to change the seed feed rate by adjusting feed rollers with a hand-wheel.
Details the hand-wheel scale, locking mechanism, and the correct technique for making adjustments.
Notes that sowing chart positions are references and require calibration for actual feed amounts.
Instructs on changing the transmission gear ratio between cereal/peas and small seeds.
Warns about potential damage if transmission pins are incorrectly placed simultaneously.
Explains the importance of correct bottom flap position relative to the feed roller for accurate seed delivery.
Describes the fertilizer feed chambers, their location, and corrosion-resistant materials.
Details how to adjust the fertilizer feed amount using a hand-wheel on the left side.
Explains the fertilizer hand-wheel adjustment, scale, lever operation, and important cautions.
Specifies correct bottom flap position for fertilizer and issues with sticky fertilizer affecting feed.
Introduces the sowing chart as a reference for settings, noting the need for calibration.
Provides advisory calibration test values for different machine models and seed/fertilizer types.
Presents detailed charts showing hand-wheel positions for various seeds and fertilizers.
Step-by-step guide for adjusting sowing settings for oats using the sowing chart.
Step-by-step guide for adjusting sowing settings for rape using the sowing chart.
Step-by-step guide for adjusting sowing settings for JAPAN NPK fertilizer.
Explains the necessity of calibration tests and lists prerequisites before starting.
Lists critical checks to perform on the machine before conducting a calibration test.
Details the steps for correctly placing calibration test troughs under the seed feeding chambers.
Describes three methods for calibration: simultaneous seed/fertilizer, seed only, or fertilizer only.
Illustrates the calibration test trough positioned correctly for the test.
Shows how the calibration test crank is attached to the machine for operation.
Explains how to collect seed and fertilizer during the test and calculate hectare rates.
Provides a formula and example to correct feed adjustment based on calibration test results.
Details the procedure for performing a field test to verify accurate feeding amounts.
Specifies test distances and how to calculate seed amount per hectare from field test results.
Explains how to adjust the depth for fertilizer application using screws on the wheel support bars.
Discusses the critical role of sowing depth for seed sprouting and factors influencing it.
Details how to adjust coulter spring loading for optimal depth in various soil conditions.
Explains the use of the main adjustment screw for controlling sowing depth and coulter weighting.
Describes coulter-specific depth adjustment using spring extension chains for compensating tire tracks.
Explains how to adjust disc fertilizer coulters to compensate for blade wear.
Describes drag coulters and their compensation for blade wear, along with mounting holes.
Details drag and disc coulter types, their applications, and interchangeable tip options.
Describes laser coulters, their advantages in light tillage, and requirements for smooth operation.
Advises users to consult distributors for complex tasks and follow instructions for longevity.
Covers typical maintenance like checking bolts, chains, sprockets, and inspecting for wear.
Instructs on ordering spare parts using part numbers from the supplied list for correct delivery.
Lists specific lubrication points on the machine and their recommended intervals for maintenance.
Provides guidance on proper machine storage, washing, and corrosion protection measures.
Lists detailed technical specifications for the TUME KL 2500 seed drill model.
Lists detailed technical specifications for the TUME KL 3000 seed drill model.
Emphasizes the importance of using only original TUME accessories and following installation instructions.
Provides a comprehensive list of optional equipment and accessories compatible with TUME drills.
General| Brand | Tume |
|---|---|
| Model | KL 2500 |
| Category | Farm Equipment |
| Language | English |
To Next Page
