Tumi 114301 - Turn On & Bluetooth Pairing; Bluetooth Pairing Process

ENG
1. Press the Power button for
2-3 seconds to turn on your
Tumi Speaker. Press the same
button again for 2-3 seconds
to turn your Tumi Speaker o.
2. Activate Bluetooth
®
on
the phone or device you
are pairing with (see your
device’s instruction manual
for information on activating
its Bluetooth
®
settings).
3. Press and hold the Play
Button on your Tumi Speaker
until you hear the Tumi
Speaker pairing sound.
4. Go to your phone or device’s
Bluetooth
®
settings and
select “Tumi Speaker”
from the list.
5. If asked for a passcode
enter “0000”
Your Tumi Speaker will remember
the last 8 devices it has paired
with.
NOTE: If your Tumi Speaker does
not have an active Bluetooth®
connection and is left on, it will
shut itself o after 30 minutes. To
restart your Tumi Speaker you will
need to press and hold the power
button for 2-3 seconds.
TURN ON & BLUETOOTH PAIRING