Tunai Creative WAND - Power On and Standby

2
Power On/Standby
Optical
(SPDIF)
USB
(Power / Data)
Analog
(AUX/RCA)
Pairing / Input Select
LED Indicator
Analog
Optical
USB
1. Supply 5V input to Micro USB, WAND will
power on automatically
2. LED indicator will go off after 2mintues.
Press the button to show the LED
indicator again.
3. Long press 5secs to enter standby mode
for the WAND. Press button again to wake
up WAND.