Manual | Carbon brake pads www.tune.de
as of May 2015 Seite 1 of 2
BUILT TO
ENJOY NATURE
BORN IN THE B LACK FOREST
Brake shoe Carbon
Bolts aluminium
Weight 45g (set of 4 brake shoes)
Brake pads SWISSSTOP Green (alu) or yellow (carbon)
Manufacturing method indivdualy hand manufactured by Bernhard Langerbein
Constructed for Shimano, Sram and Campagnolo brakes.
Instructions
• The brake shoes get mounted with a Torx 25 tool with max. 8Nm torque.
• The brake shoe is constructed for Shimano, Sram and Campagnolo brakes. Shima-
no / Sram brake pads have to be used.
• Before every ride, make sure that your tune product is in a good condition and func-
tioning properly. If there seems to be any irregularities the product should not be
used. Contact your retailer for help.
• Never clean your Tune products directly with high water pressure (pressure clean-
er) and do not use aggressive detergents.
as of May 2015
CARBON BRAKE SHOES
MANUAL
To Next Page
Need help?
General
